Minggu, 23 Oktober 2011

Mercedes-Benz Prepare Competitor BMW X6

Mercedes is preparing Coupe-SUV that will tackle the BMW X6 step in the market. German luxury car manufacturer was appointed plant in Tuscaloosa, Alabama, as its production base and is expected to be rolled out in 2015. Reportedly, a fund of 350 million U.S. dollars or about Rp 3.1 trillion ready to be launched as an investment in this project.

"The latest model to be built in Tuscaloosa is an important element in our development strategy. And, this product is one of the 10 models we plan to launch up to four years," said Dieter Zetsche, CEO of Mercedes-Benz.

Cars that plan bears the name of the GLS is the incorporation of two characters, M Class and CLS Saloon. It can be seen from the roof design adopts CLS. While the cabin space and haulage cheating M Class models, only differentiated haulage capacity of 5 passengers to 4.

As a supplier of energy, GLS equipped with three engine choices 3.5-liter V6, 4.6-liter V8 and 3.0-liter V6 diesel. Although still under consideration, the trio will use the additional power supply turbocharged. In fact, Mercedes is also preparing a variant to match the X6 M by presenting a version of the AMG 5.5-liter turbocharged V8.

GLS will not only disrupt the X6 market that has successfully made ​​a sale of 120,000 units worldwide since 2009, but also will compete with new products that will present the Audi Q6 2016. Including the Range Rover Sport which comes first year before the GLS.

Senin, 26 September 2011

How to Apply Automotive Paint

You will need to choose the tools to use wisely, select that part of the garage that is well ventilated i.e. where there is free passage of air. If you want to repaint your vehicle on your own and achieve that trendy look, then it is important to get all the information you can get about the paint that you will use. All automotive paints are not the same but there are some few qualities that you need to ascertain before you buy the paint for your car.
Any paint that you use should not be polished after application unless it is of poor quality. Paint should always be flexible without the use of flex additives. To improve paint coverage, use paint primer as an undercoating.
When dealing with a minor repair or even a full restoration, preparation is absolutely necessary. Clean the surface that you are using. There are two types of contaminants that will need to be cleaned, these are Water based contaminants, such as dirt, dust and bird droppings. These can be removed easily with a good car washing soap and hot water. And then there are Solvent based contaminants that include wax, plastic resin, oil and tar grease. These require the use of grease remover. In order to know that the area is clean, flush it with water. The water should not stick on this surface, if it does you will need to add more grease remover.
Before applying the automotive paint that you desire, you can remove the old paint using solvent based color removers, making a smooth base on your car body. You are now ready to use a primer on these surface. Use a top quality spray gun, applying sweeping horizontal strokes back and forth. Let the coat dry before sanding it again and applying a fresh coat.

Rabu, 14 September 2011

Cool! Honda C50 Wood accent


In addition to cafe racer and older scooters, the Honda Cub or Honda duck is also part of the trend of older vintage motorcycle lately. No more talk about the uniqueness and value of its vintage, making it authentic, too, is something that is second to none for some people.

However, a modification of the house called the White House located in Saitama Prefecture, Japan, turning it into something new that looks elegant at once, without losing the impression of a vintage. Honda C50 is now accented wood and has a nickname that is long enough, the "Super Super Cub50 Accent Ogano Woody".

At first glance he looks like Honda Scoopy. The impression was visible from the curved shape of the nose below the front to the tail lights, plus a bi-color appearance. Its headlights were perched, just not like the old Vespa above the fender, but perched on the tip of the arch. In addition, similar DKW model taillights.

Match the black color combined with brown and old in the body makes it so elegant when fitted with leather seats. Other changes seen in the form of handlebars and a speedometer that naked, but still organized and simple. Looks neat workmanship of the installation of wooden body with a shiny coating. As a result, the original Honda engined 4-stroke 49 cc is easy to provoke the eyes.

Kamis, 01 September 2011

How to Purchase ATVs For Sale Online

There are some major top search engines like Google, MSN, Yahoo, etc, who are dominating the world wide web and are famous for their own quality and service.
Now a day in this technological world, making a purchase online is the easy way for shopping, in just few clicks you are done with the purchasing and the product is at your home
In today's world most of the Buying and selling is happening online. Buyer and Sellers are looking for products Online. Suppose you are now trying to make a purchase, and you are a fresher in this internet buying and selling thing then you need to be very careful with the transactions you make and you should always be on a secure side of not sharing your personal details with any one online except the website you are dealing with and also look for the site if it's genuine.

There are many fake websites which will ask for your personal details and will send you a fancy good looking mail to lure you for making a purchase online, and in the end you are quite closer to become bankrupt.So let us make an assumption and suppose you are making a purchase of ATVs for Sale Online, there are few major things you should consider before making a deal, and do make sure that you are clear about the above thing about the security I mentioned earlier, so let's get back to the purchasing thing.

Here are the few things you should keep in mind before making a deal.
There are many major best ATVs available in market; the major dominating names are Polaris ATV, Yamaha ATV, Suzuki ATV, Arctic Cat ATV, etc.
Basic Specifications For Buying an Atvs for sale:
Price : Price
Year : 2007
Type : Four Wheeler, Three Wheeler, Six Wheeler, Dune Buggy, Golf Carts, Sand Rail
Make : Polaris ATV, Yamaha ATV, Suzuki ATV, Arctic Cat ATV
Model : Scrambler 500, Ksf450b Kfx450r, etc
Location : (look for dealer location near you)
Always see that the vehicle is well described and it's correct and also look if the dealer is a reputed dealer and sell good quality vehicles.
Hope that the above information is useful for you and helps you to make a successful transaction online and while keeping you safe from hackers....

Jumat, 26 Agustus 2011

Used Cars - Tips For Buying

Stand at the front, or the back of the car, and look along the body line. You will be able to see if it has had any body damage as the light reflecting off the side of the car will show the dents or replaced panels.
Check around the window rubbers for over spray, a sure fire way to see if a car as been touched up.
Don't buy a car in the rain, the bodywork always looks better when it's wet, plus, the chances are you will forget to check something by rushing to get out of the rain.

Check the gaps between the panels to make sure they are even on both sides of the car. Bonnet to wing etc. This is a good indication as to whether the car has been in an accident and had panels replaced.
Take a fridge magnet with you and check the bodywork for filler. The magnet will stick to the metal, but will fall off if it meets body filler.
Check the steering wheel, and accelerator pedal rubber for excessive wear, the clutch and brake pedal rubbers can be replaced, but the accelerator pedal is a lot harder to change, and will give a truer indication of mileage. Have a look at the interior of the car, does the wear inside the car look in keeping with the mileage. If the car looks like its done 100,000 and the clock says 25,000. Then you know its been round the clock, or even worse clocked.

Check the tires for uneven wear, if the tires are worn more on one side than the other its an indication that the car may have been in an accident and the chassis is twisted. It could also be the tracking or wheel balancing. Either way its not a good sign. Check underneath the car for any oil or water leaks, also check the floor where the car has been standing for the same.
Try a 3 point turn in the car, that will check the reverse gear, and if you put the steering on full lock you will be able to check the wheel bearings and steering rack (your looking for clunking sounds or creaking).
When the engine is now hot check the oil, if it is milky there is water getting in somewhere, which could indicate a head gasket. (very Costly).
Drive the car, (with the radio off) and check for any knocks or strange noises. Check the steering for vibration, or pulling to one side, its an indication again that the car may have been in an accident and the chassis is twisted. Make sure you drive the car in all gears to check the gearbox.
 The oil should be filled to between the 2 marks on the dipstick. If the oil is brand new beware, not many people will change the oil on a car the day before they sell it unless they are trying to hide something. Also check the water reservoir for signs of oil, not a good sign.Last of all, check the paperwork. Make sure the registration document is in the sellers name. They may be a trader trying to pose as a private seller. Check the MOT to make sure its current. Check the service history to make sure it matches the vehicle being sold. Also you may want to check the engine and chassis number to see if it matches what is on the registration document. You will find that information on a small metal plate located under the bonnet. If the plate is missing be suspicious.
It's also a good idea to get the car HPI checked. This will tell you if the car has been stolen, been in an and accident, or is on finance. It costs around £40 but well worth it.
 I would not buy a car without doing these checks first. If you follow these rules when buying a used car you wont go far wrong. If you can't be bothered to go through the hassle, then buy your car from a trader, he or she will have already done all these checks to cover himself before he or she purchases the car.

Rabu, 17 Agustus 2011

Used Cars - Tips For Buying - Second Hand Cars

Stand at the front, or the back of the car, and look along the body line. You will be able to see if it has had any body damage as the light reflecting off the side of the car will show the dents or replaced panels. Don't buy a car in the rain, the bodywork always looks better when it's wet, plus, the chances are you will forget to check something by rushing to get out of the rain. Check the gaps between the panels to make sure they are even on both sides of the car. Bonnet to wing etc. This is a good indication as to whether the car has been in an accident and had panels replaced.


Check the steering wheel, and accelerator pedal rubber for excessive wear, the clutch and brake pedal rubbers can be replaced, but the accelerator pedal is a lot harder to change, and will give a truer indication of mileage. Check the tires for uneven wear, if the tires are worn more on one side than the other its an indication that the car may have been in an accident and the chassis is twisted. It could also be the tracking or wheel balancing. Either way its not a good sign.


Last of all, check the paperwork. Make sure the registration document is in the sellers name. They may be a trader trying to pose as a private seller. Check the MOT to make sure its current. Check the service history to make sure it matches the vehicle being sold. Also you may want to check the engine and chassis number to see if it matches what is on the registration document. You will find that information on a small metal plate located under the bonnet. If the plate is missing be suspicious. If you follow these rules when buying a used car you wont go far wrong. If you can't be bothered to go through the hassle, then buy your car from a trader, he or she will have already done all these checks to cover himself before he or she purchases the car. I would not buy a car without doing these checks first.

Sabtu, 13 Agustus 2011

Apply Automotive Paint

Any paint that you use should not be polished after application unless it is of poor quality. Paint should always be flexible without the use of flex additives. To improve paint coverage, use paint primer as an undercoating. All automotive paints are not the same but there are some few qualities that you need to ascertain before you buy the paint for your car.


In order to know that the area is clean, flush it with water. The water should not stick on this surface, if it does you will need to add more grease remover. There are two types of contaminants that will need to be cleaned, these are Water based contaminants, such as dirt, dust and bird droppings. These can be removed easily with a good car washing soap and hot water. And then there are Solvent based contaminants that include wax, plastic resin, oil and tar grease. These require the use of grease remover. 



You are now ready to use a primer on these surface. Use a top quality spray gun, applying sweeping horizontal strokes back and forth. Let the coat dry before sanding it again and applying a fresh coat. If you want to repaint your vehicle on your own and achieve that trendy look, then it is important to get all the information you can get about the paint that you will use. You will need to choose the tools to use wisely, select that part of the garage that is well ventilated i.e. where there is free passage of air.

Sabtu, 06 Agustus 2011

Before You Replace the Brakes, Check Your Tires

It was elusive at best. One moment it was so loud that other drivers would stare as my car moved past them. The next moment, there was no sound at all. I don't know if this is factual, but I believe it improves the odds if you have an idea what is wrong. Maybe this is why I feared being jerked around at first. But, it didn't make sense. Neither mechanic had a thing to gain by my not getting new brakes. The officer at the DMV reprimanded me for the poor condition of my brakes. In fact, he said, "I almost didn't give your son his driver's license because your brakes made so much noise. Several times, I came close to telling him to just pull the car over." How embarrassing was that! I tried to explain the situation but he was emphatic that he had years of experience with cars and it was in fact the brakes.

I asked the mechanic to drive the car for himself. He drove the car around the block several times and could not identify the scraping sound that I had complained about. I took the car once again to my mechanic. He instructed me to back the car up then roll forward as he stood outside and listened. No scraping sound. I did this several times defending the fact that there was a problem.

I rolled down my window and listened intently as we drove. After he made a sharp road turn, I heard the sound. Eureka! At first, he could not hear it. But I coached him to keep driving. He finally heard it. By this time, I was quite agitated, even more perplexed and embarrassed. I assured the mechanic that there was a problem and suggested that if we continued to drive, maybe we'd trigger it. The mechanic told me to jump in the passenger side and we drove even further.

I sat and observed. Despite several tests, he could not recreate the sound. As I needed to get back home, the office arranged transportation for me. I silently prayed that they would identify and fix the problem. And most of all, that it not cost me goo-gobs of money.

A couple of hours passed then I received a call. The mechanic said that the problem was not the brakes -- it was the tires. I couldn't believe it. My front tires, appearing to be in good condition, were the problem. He explained that the sound only occurred when the tires were in contact with the road. I consented for the mechanic to replace both front tires. The scraping stopped

Senin, 01 Agustus 2011

Here's How to Save Fuel

World oil prices now soaring above U.S. $ 110 per barrel. This condition makes the price of fuel oil surged participate.
Price Pertamax for example, in Jakarta has reached Rp9.050 per liter.Likewise Premium, 88 octane petrol has also been very expensive. However, because of subsidized, the price remains Rp4.500 per liter.



Fuel prices soar. We recommend that you start to save money from now.

However, the actual saving behavior not only because fuel is expensive. Fuel was cheap even need to be saved. Therefore, the fuel is a source of energy that can not be updated again.

How to save fuel. Here are the tips:

1. Do not heat the car for too long, a maximum of two minutes. Warming the engine for 30 minutes might as well beat the traffic. Compare if you run a car with an average speed of 60 kilometers per hour, for 30 minutes you already covered 30 kilometers.

2. Reduce the habit of eating lunch outside the office. Should take stock, message delivery, or enough to eat in the cafeteria office. This is so that fuel is not wasted, especially when the jam occurs.

3. If traveling, take your family or office colleagues that direction, so no need to use two or more cars.

4. Take advantage of public transport such as busways, railway, or other public transport, so the use of fuel can be suppressed.

5. When out of town, when conditions are bad you should just step aside.Take advantage of the jam to eat, urinate, the content of gasoline, or rest.Wait until the condition of the road a bit quiet.

6. Try to drive smoothly. Reduce the frequency of braking. Anticipate traffic ahead of you really need. If there are red lights, do not need menggeber gas, let the car slide, yet later exposed to red light as well. Remember, do not press the accelerator and brake, energy is simply wasted.

7. Turn on the air conditioner only as needed, and lower charges are always useless in the car. Good luck.

Rabu, 27 Juli 2011

The car battery is weak Follow These Steps


Currently you wish to return to Jakarta after a stay in touch at home. However,vehicles cause problems, like baseball machine in the "starter". Battery jumperis one of the most frequently used solutions. Looks very SIMPLE, but must pay attention to rules to avoid the dangers, both for batteries, electric cars andpen-jumpers.

This secure these steps

1. Position the two cars with good and true, especially the two batteries berdekatakan. Do not block the road.

2. Clean the valve of positive and negative battery is weak.

3. Connect the red jumper cable clamp to the positive pole, either to the car battery is healthy or weak.

4. Connect the negative jumper cable clamp to the negative pole, heed to the battery is weak, then to the battery healthy.

5. First car starter batteries are healthy. let a few moments.

6. After that, the car battery, the starter is weak.

7. After work, remove the jumper cables. FIRST jumper cable to the negativepole, followed by the positive pole.

8. On the machine that is turned on (low battery), allow some time to happen the charging process.

Senin, 18 Juli 2011

Tony Hawk Auction For Harley Skateborad



Love of the sport are able to make somebody do anything in order to achieve his goal. Acted like Tony Hawk, the skateboard athlete (skateboard) professionals, whohave ambitions of building a playground for the skateboard in the big cities in America.

To fulfill his desire, Tony volunteered one of his motorbike Harley DavidsonSportster Nightster XL auctioned. But before the auction, moge America modifiedand home modifications Rland appoint Tony Sands Design (RSD) to change the look of a custom Harley so much.

RSD change in nearly all parts of the motor, starting from the legs using Bosswheels, exhaust RSD, close the cylinder until the seat of the Mustang engine,making this Sportster style bike look more formidable. The final touch, gray bird witha skull logo and some graphic design on the lid mebuat motorcycle engine oil looksincreasingly grim.

There are two units that made ​​Tony for this auction. The first motor was done in LosAngeles and sekarangmotor Harley who is prepared to Las Vegas.

Kamis, 14 Juli 2011

14 Signs Car Audio Problem


Car audio system in which there is an electronic component and installation must undergo a process of degradation. In fact, it is not possible due to damage to the parts that use a less precise way up weaknesses on their own products.

There are 14 signs that can be said to be a problem on the audio system, as stated Andreas Tjahjadi (installer Audio Plus in West Jakarta), Erwin (installer Radius Mobile Works), and Hongyono Chandra (audio installer Artery Prisma in Pondok Indah, South Jakarta).

1. Battery voltage drop due to reduced capacity of battery acid. Problems can also occur due to the charging terminal (ground) loose or less filling. As a result, electricity supplies disrupted.

2. Terminal / head causing a lack of crusty battery voltage and can make the system disrupted. In addition, the main fuse (main fuse) to melt under the influence of the engine compartment due to the heat shield that also melted.

3. Damage to the CD player. It is characterized by the process of reading the CD a bit long, and even tended to be silent (or skip) before entering the tracks. The problem was triggered using a CD that does not fit the standard thickness.

4. Volume keys. Head unit sometimes works, sometimes not. If so, then it is characterized by a flexible cable that broke on the inside.

5. RCA cable ground breaking on the inside of the head unit. This makes storing symptoms (noise) from the speakers.

6. The sound cracked (crackle-crackle) in speakers. There was dirt in between the voice coil and magnet.

7. Sound lame. Sound heavier to one side because one of the midrange or tweeter speaker dies. The reason, the solder on the connector detached speakers.

8. Speaker smoky. There was an electric short circuit between the speaker cable (for connection to rust) to the ground so that the voice coil heat. As we know, in case of short circuit on the speaker, this condition will affect the power performance, even lead to malfunction if the power amplifier is not equipped with short circuit protection.

9. Tweeter damage. In this case, the high tone gradually became clip (cracked).These problems can occur because of the weather due to the sun often highlighted.Such conditions can make the diaphragm tweeter becomes brittle.

10. Subwoofer death total as a voice coil on fire due to overpower.

11. Distortion. This usually appears on the subwoofer when it coincided with the sound of bass. Problem arises because a suspension subwoofer is weak or there is dirt between the voice coil and magnet.

12. Damage to the potentiometer in the power lead voice on the speaker-sided.

13. Sound occur "jedug" when the system is enabled or disabled. This occurs because there is damage to the power components.

14. Because there is damage to the power, the cone on the speaker "glaring" when the system is enabled. That is, out of power is a DC current (supposed to be AC).This is because the solder on the PCB board or it could be caused by loose dirt.

Senin, 11 Juli 2011

Let's Clean Car Wheels


Car wheel radius design is quite beautiful views and tend to be boring. However, it is very difficult because while cleaning it has loopholes that are difficult to reach with your fingers. Nah not have a headache, follow these steps to eliminate impurities in the alloy is below.


1. Do not wash the wheels when the new car is used. Therefore, the wheels are still hot will cause mildew if directly quenched in water. We suggest you wait until cool.


2. Make sure the space in the fenders clean (cleaned first) so that dirt does not fall and stick to the wheel.


3. After that, new wheels turn. After flushing, use a shampoo or a special liquid. For a colored chrome, chrome wear a special liquid to avoid the risk of peeling off layers.


4. For hard to reach corners, use a brush or a toothbrush. If there are still stubborn stains, then you should first bahasi wheels and let stand for a moment, then cleared.


5. If there is a "black gold" (asphalt), then stain it usually does not work if removed with just a shampoo. To that end, can use gasoline or kerosene. Next, clean the wheels with the help of compound that gasoline does not leave stains.


6. Sure is clean? Dry the wheels with a chamois cloth.


Specifically for chrome wheels, if you want this thing sleek, then ditaburilah powder, then rubbed with a clean cloth. You can also use a special wax chrome color.

Choosing Window Film and Maintenance


With so many brands of window film market, consumer demand should determine the choice. Inevitably, the price factor is very decisive. Likewise with the performance or the performance of the glass layer.


The main factors to consider choosing and security window film is not just appearance. The reason, in terms of looks a lot of window film is interesting, but less security.


Second is the level of darkness for the front windshield. Do not overdo it. The government only allows a maximum of 40 percent. If it is too dark, plus the lack of good quality glass, it would be dangerous drivers at night and when it rains. The view can be violated.


Age Wear

Further, the age of 5-7 years maximum glass film and is highly dependent on the quality of the product. If you've been through this period, its ability to block the sun's heat, ultraviolet rays and infrared certainly have been ineffective. If you have this need to be replaced!


treatment

How to care so durable? First, the priority hygiene glass from both inside or outside of the outside cabins. To membesihkannya, use a cloth basahdan after that again wiped with dry gauze cloth or chamois.


Want to Vacation with Vehicle, Follow These 7 Steps

Want to Vacation with Vehicle, Follow These 7 Steps

Child's school holiday season coming. Maybe you have no intention of taking a family vacation out of town and use personal vehicles. It was the right choice because the car itself can wara-wiri. Well, to travel smoothly, there are 7 little guidance from GardaOto be prepared, either to the vehicle or the family.


1. Prepare the condition of the vehicle. Check your tire pressure (in cold conditions), check water capacity and condition of battery, radiator, and oil. Make sure the vehicle is functioning properly. If the need to bring the vehicle to the garage subscription or authorized repair shop for service.


2. Prepare emergency equipment. Fill your car with a spare tire, jack set, lock the tires, plus and min screwdrivers, wrenches ranging in size from 10 to 19, a key spark plug, wrench, safety triangle, flashlight, road map, and the last is P3K box! The toolkit can be easier when you find difficulty in traveling.


3. Protect your car through a credible insurance with a network of workshops and an extensive branch and has the facility emergency road assistant!


4. Do not forget to write down important phone numbers, such as ambulances, hospitals, and emergency numbers. Not to forget the hotline service your car insurance.


5. Complete vehicles with additional equipment, such as mobile phone charger, blankets, and pillows for the baby, as well as snacks for you and your family from getting bored on the trip.


6. Keep your fitness. Driving while on holiday of course, requires excellent condition. Should arrange time off for fitness is maintained. Consumption of nutritious foods and make sure the body fit while driving.


7. Beristiratlah if needed. If the body feels tired, rest an hour to two hours. You can go on if your body is refreshed.


Happy holiday! Hopefully your vacation into a memorable vacation!